Audi cars are fitted with wheels and tyres chosen for their handling, braking, and ride, and the right set depends on the exact model, year, and trim. This guide covers the tyre and wheel side of owning an Audi: how to find the correct specification, what to check before buying, and how to keep the wheels and tyres in good condition.
Find the correct specification
Audi has used different tyre sizes, wheel diameters, bolt patterns, and offsets across its range and over the years. Start with the model, year, and trim. The owner’s manual, the tyre placard in the door jamb, or an Audi dealer can confirm the approved sizes for your car.
Tyre size, load and speed ratings
Check the tyre size, load index, and speed rating on your current tyres, and make sure any replacement meets or exceeds them. Many Audi models use low-profile tyres on larger wheels, which sharpen steering but are more sensitive to kerb damage. Check that the tyre is approved for the wheel width.
Choosing wheels
Factory wheels fit the car exactly and are the simplest choice. Aftermarket wheels offer more designs and finishes, but the diameter, width, bolt pattern, centre bore, offset, and load rating must all match the car. A centre bore larger than the hub can be centred with hub rings, but a smaller bore will not fit.
Tyre pressure monitoring
Many Audi models use a tyre pressure monitoring system. Check that new wheels and tyres are compatible with the sensors, and check whether sensors need to be transferred or replaced when wheels change.
Seasonal tyres
Some owners run summer tyres in warm weather and winter tyres in cold, snowy, or icy conditions. Check the approved sizes for both sets, and make sure the wheels and tyres are balanced before each changeover.
Fitting and torque
Fit wheels with the correct bolts or nuts for the seat design, and tighten them to the torque specified by the manufacturer. Re-check the torque after the first short drive and at each service. Use a torque wrench, because over-tightening can damage the studs and the wheel.
Caring for Audi wheels and tyres
Clean the wheels regularly with a pH-neutral cleaner, and check the tyres for cuts, bulges, and uneven wear. Keep tyre pressures correct, rotate the tyres at the interval recommended by Audi, and check the wheels for kerb damage or cracks after rough driving.
Frequently asked questions
Can I fit wheels from another Audi model? Only if the diameter, width, bolt pattern, centre bore, offset, and load rating all match your car.
How often should I rotate Audi tyres? Follow the interval in the owner’s manual, which is often between 5,000 and 10,000 miles, and check tyre wear at each rotation.
Do I need special tyres for an Audi SUV? Often yes. Choose tyres approved for the size, with the right load and speed ratings for the vehicle.
Get help with Audi tyres and wheels
For more on choosing tyres and wheels, read our tire guides and our wheel guides. If you are not sure which tyres and wheels suit your Audi, contact us with the model, year, and trim and we will help you check.